特徴

▲先進的な新型蜂の巣回転輪と環境保護省エネ設計を採用し、伝統的な蜂の巣の成形難、コストが高く、摩耗しやすく、劣化が速い欠点を克服した、
▲換気口に冷却器を設置し、比較的低い乾燥換気温度を確保し、除露効果を高める、
▲金型の使用寿命を延長し、腐食を低減し、製品の瑕疵と廃品率の比率を減少する、
▲PID温度制御システムを採用し、再生温度設定と実際の温度表示機能を持つ、
▲超温、電源逆相、モータ過負荷などの保護機能がある。

▲ Honeycomb rotor is used to ensure constant air dehumidification effect
▲ Outlet equipped with cooler, the outlet air temperature, dry to ensure low increase in addition to the effect
▲ Inhibits corrosion and prolongs service life of the mould, and yet reduces moulding cycle time
▲ Supplied as standard,a return air collector is used to collect return air from the moulding area back to this machine and to form a closed-loop air circulation, which is particularly practical in tropical climate
▲ Accurate control and display of regenerating temperature using PID Control
▲ Have over-temperature, and the power phase sequence errors, such as motor overload protection function

製品の概要

WHMDシリーズ金型除湿機は主にプラスチック成形に応用され、金型は冷凍水を使用して成形周期を短縮することによる結露問題、特にPETボトル胚の射出が最も適している。本機は蜂の巣ローターシステムを用いて除湿作業を行い、金型周囲が常に0〜10℃の低露点空気環境を維持することを確保し、金型に結露現象を発生させず、季節変化の影響を受けず、不良率を大幅に低下させる。

The WHMD series mould sweat dehumidifiers are designed for the inhibition of moisture sweat from condensing on the mould surface Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms To bring about the moisture sweat on the mould surface is because the mould surface temperature is lower than the dew point temperature of surrounding air, the water vapor comes into being, then causes corrosion of mould and effects quality of moulding parts as well as production efficiencies. This series of machine uses honeycomb rotor to carry out dehumidification function，which generates a dry airflow with dew point ranging from 0～10℃ and ensures the surrounding air of mould remaining in a low dew point temperature It provides constant low dew point surrounding air to the mould surface all year round without being influenced by the change of seasons.